national

Wall Putty

adasd

Description

For good adhesion and protection of Walls and wood surfaces, it may also be used on dry concrete, masonary etc.

Surface Preparation

New and Unpainted Surface

Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Wall Filling and allow it to dry for 8 hrs.

Previously Painted Surface:

Clean the surface by removing all dirt and grease. Remove all loose flaky paint by scraping. For best results apply one coat of No 1 National Wall Putty. It will give excellent finish and smooth silky effect

Application

NO OF COATS:

Two

COMPOSITION:

Based on poly vinyl acetate.

MIXING RATIO:

Single pack

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Touch dry:

1 Hours

Recoat able:

2 Hours

Hard dry:

8 Hours

 

THINNER :

Cool Water

FILM THICKNESS:

25-30 microns per coat.

20-25 microns per coat.