tower

Weather Shield

tower-ws

Description

Suitable for all the exterior masonry surfaces such as brick, concrete, plaster and similar surfaces.

Surface Preparation

Surface must be dry and clean. For new surface remove all loose powderly by sweeping with sand paper. Apply a sealing coat with Tower Exterior putty. Allow the filler to dry overnight before painting with emulsion paint. For old surfaces, necessary repair work of cracks and defective rendering should be done before painting, Remove all moss, Remove poorly adhering or powder coating. Apply sand paper to get smooth surface. For best results apply one or two coats of Tower Acrylic Primer or Exterior Filling.

Application

NO OF COATS:

Two or Three

COMPOSITION:

Based on acrylic emulsion binder.

MIXING RATIO:

Single pack, ready to use after 50% thinning with water.

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Surface dry:

30 minutes

Recoat able:

2 Hours

Hard dry:

2-4 Hours

APPLICATION :

Brush, Roller or conventional spray.

THINNER :

Water

FILM THICKNESS:

20-25 microns per coat.