For good adhesion and protection of Walls and wood surfaces, it may also be used on dry concrete, masonary etc.
New and Unpainted Surface
Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping, chipping and wire brushing. Prime with Wall Filling and allow it to dry for 8 hrs.
Previously Painted Surface:
Clean the surface by removing all dirt and grease. Remove all loose flaky paint by scraping. For best results apply one coat of Tower Wall Putty. It will give excellent finish and smooth silky effect
NO OF COATS:
Based on poly vinyl acetate.
Depends on temperature, humidity, air movements & film thickness
25-30 microns per coat.
20-25 microns per coat.