national

Texture EMulsion

nationa-te

Description

Suitable for exterior & interior use on concrete, gupsum. brick, asbestos etc.

Surface Preparation

New surface must be clean, dry and free from dust, wax, salts and all unwanted material. Remove all defective and poorly adhering material of previously painted Surfaces by rubbing down using abrasive paper and dust off. For large holes and cracks. Use plaster of paris or white cement. Allow to dry. Apply 1-2 coats of No 1 National Wall Filling or Acrylic Primer for proper sealing from water & salts and allow to dry. Rub down the surface with abrasive paper and dust off. Apply No 1 National Texture Finish with roller. Apply designing roller to create the desired textured look.

Application

NO OF COATS:

2 to 3 Coats

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Surface dry:

3-4 Hours

Hard dry:

12 – 15 Hours

 

APPLICATION :

With Roller