
Aqua Matt

Description
Tower Aqua Matt Emulsion is a premium quality water-based paint specially designed to give a luxury smooth finish to interior masonry surfaces, brickworks and wallboards. It is a highly washable emulsion. Its fungus resistance properties, smooth finish and long lasting colours make it an ideal choice for interiors.
Surface Preparation
New Or Bear Masonry Surface:
Bare masonry surfaces should be completely dry and free from dust, dirt and grease. Use a bleach solution to treat the surface affected by fungus. Apply Tower Acrylic Primer and allow thorough drying. Sand and dust off. Smoothen the surface by applying 2-3 Coats of Tower Filling Putty. Sand and dust off thoroughly. Allow all the surface to dry completely prior to painting. Avoide paint if the moisture content and alkalinity of the walls is still high.
Previously Painted Surface:
Loose and flaking paint must be scraped off. Defective areas should be sanded and smoothened using abrasive paper or wire brush and dust off. Primed with Tower Acrylic Primer. Fill the surface with Tower Filling Putty if Necessary.
Severely Defected Surface:
Masonry work is recommended to repair large cracks and holes. Allow to dry thoroughly. Prime with Tower Acrylic Primer. Fill with Tower Filling Putty. Scuff to make smooth and dust off thoroughly.
Application
NO OF COATS:
2 to 3 Coats
COMPOSITION:
Based on Styrine Emulsion Winder
MIXING RATIO:
Single pack, ready to use after 50% thinning with water.
DRYING TIMES:
Depends on temperature, humidity, air movements & film thickness
Touch dry:
15 minutes
Recoat able:
2 - 3 Hours
Hard dry:
45 - 60 Minutes
APPLICATION :
Brush, Roller or conventional spray.
THINNER :
Water
FILM THICKNESS:
20-25 microns per coat.