national

Plastic Emulsion

nationa-pe

Description

Suitable for all the interior masonry surfaces such as brick, concrete, plaster and similar surfaces. It is particularly recomended for more usage areas like living rooms, Kitchen etc.

Surface Preparation

Surface must be dry and clean. For new surface remove all loose powder by sweeping with sand paper. Apply a sealing coat with No-1 National Wall putty. Allow the filler to dry overnight before painting with emulsion paint. For old surfaces, necessary repair work of cracks and defective rendering should be done before painting. Remove all moss, Remove poorly adhering or powder coating. Apply sand paper to get smooth surface. For best results apply one coat of No-1 National Acrylic Primer. It will give excellent finish and smooth silky effect.

Application

NO OF COATS:

Two or Three

COMPOSITION:

Based on Copolymer Emulsion binder

MIXING RATIO:

Single pack, ready to use after 50% thinning with water.

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Surface dry:

30 minutes

Recoat able:

72 Hours

Hard dry:

72 Hours

APPLICATION :

Brush, Roller or conventional spray.

THINNER :

Water

FILM THICKNESS:

20-25 microns per coat.