national

Metallic Finish

national-mattalic

Description

No 1 National Metallic Finish is an excellent quality paint suitable for use on all types of wood & metal surfaces, It gives smooth and lustrous finish. It gives protection against water, rust, heat and dust etc.

Surface Preparation

New or previously painted surfaces must be clean, dry and free from grease, rust, dust etc. Rub down the surface with the help of abrasive paper. Apply No 1 National red oxide primer in order to prevent the surfaces from rust. When dry, rub down the surfaces with abrasive paper. Apply Honey Gold synthetic undercoat on the surfaces. After drying, rub down with the help of abrasive paper again. Apply No 1 National synthetic metallic enamel. Stir thoroughly before use..

Application

NO OF COATS:

Two

COMPOSITION:

Based on Styrine Emulsion Winder

MIXING RATIO:

Single pack, ready to use after 50% thinning with water.

DRYING TIMES:

Depends on temperature, humidity, air movements & film thickness

Touch dry:

2-3 Hours

Recoat able:

8-12 Hours

Hard dry:

24 Hours

APPLICATION :

Brush or conventional spray..

THINNER :

Mineral turpentine

FILM THICKNESS:

20-25 microns per coat.